Seed cleaning machine has a wide range of applications. It can optimize the seeds of wheat, rice, corn, sorghum, seeds, rapeseed, green feed and green fertilizer. This equipment has high requirements for application and maintenance. A little carelessness will endanger the quality of seed collection. As a supplier of Seed Cleaning Machine, I will introduce you to the maintenance of this equipment.

Double Air Cleaning System

1. The cleaning machine should work in the room as much as possible. The placement location of the equipment should be flat and reliable; in addition, the placement location should consider the convenience of dust removal.

2. Before working, please check whether the connecting screws in each position are tightened, whether the parts of the transmission system are easy to rotate, whether there is abnormal noise, etc.

3. After the whole work process is over, please ensure that the remaining seed particles in the equipment are cleaned neatly. After confirming that no seed particles and residues are discharged from many storage rooms, the equipment can be terminated, and the seeds and residues on the surface of the upper sieve can be cleaned to the trash can, and then the powder on the upper sieve can be cleaned and removed and the powder on the lower sieve can be cleaned.

Daily inspection of Seed Cleaning Machine

1. Check all nuts, bolts and screws daily, and tighten or replace as needed.

2. Check the spring tension on the brush and brush drive mechanism, adjust or replace if necessary.

3. Make sure the feed hopper is full to ensure that the seeds flow evenly across the width of the screen.

4. Check the fan and main eccentric bearing for adjustment, wear and excessive vibration; replace if necessary.

5. Check the air box to make sure that there are no residues such as straw in it.

6. Check the exhaust port to ensure that the seeds are not blown away by the air flow and are discharged through the dust collector.

7. Check daily to ensure that all screens are fixed in the correct position on the shaker.

8. Check all screens daily to ensure that the surface is flat and real.

9. After each operating shift, clean the machine, including the screen, and lubricate all bearings according to the instructions in the operating manual.

10. Check the vacuum cleaner frequently during operation, and detect any malfunction visually or by ear.

11. At the end of the processing season, check the worn and damaged parts and replace them immediately.

SYNMEC is the worldwide successful manufacturer for grain cleaning & seed processing machinery。

If you want to learn more about the product, please contact us.