手机banner

News classification

How to do Preventive Maintenance for the Corn Selection Machine?

How to do Preventive Maintenance for the Corn Selection Machine?

Release date:2021-10-11 Author: Click:

Corn selection machine and corn cleaning sieve are important types of corn cleaning equipment; suitable for selecting grain crops such as wheat, corn, beans, sorghum, tea seeds, etc., with super dust removal, specific gravity grading selection and volume multi-purpose functions such as grading and screening. Compared with the same type of products, the selection machine has the following advantages: it can remove 99% of the broken cores and light impurities of the same volume as the grain particles in different types of grains, and can remove more than 98% of the moldy and degraded grains in the grain. And this series of equipment is suitable for use in grain processing centers, seed processing bases, farms, and grain purchasing online stores. So how to do preventive maintenance for the corn selection machine? Follow Seed Cleaner and Grader Manufacturer to take a look.

Seed Cleaner and Grader

Seed Cleaner and Grader

After each large-scale warehousing, all used equipment should be finely overhauled and maintained. Air pumps should be used to remove dust inside and outside the equipment and at the gaps, leaving no dead corners, and then wipe with a rag; check all power distribution lines, replace aging wires. Maintenance of the motor; oil immersion, cleaning the large and small bearings, screws, etc., and adding lubricating oil to maintain the bearings; replacement of broken or damaged parts, welding and correcting the collision parts if necessary; anti-rust treatment of the paint peeling parts, etc., until scrubbing and maintenance. New, neatly placed in the mechanical library after installation and commissioning. This work is generally completed before the purchase of summer grain and autumn grain. Professionals from the manufacturer can be invited to carry out this work together with the maintenance personnel of the company. At the same time, the equipment maintenance plan shall be arranged every year according to the condition of equipment wear and the requirements of the equipment manual, and equipment overhaul and medium repair shall be actively carried out.

Repair afterwards

After mechanical equipment breaks down or is damaged, promptly carry out equipment repair work. Generally, you should first consider replacing the faulty machinery with a spare machine, in order not to delay the process of in and out of the warehouse; if there is no spare machine or the fault is easy to solve, the maintenance personnel need to work overtime. Post-maintenance is generally only carried out for the point of failure. If the mechanical equipment needs to be fully repaired after it is replaced, it should also be overhauled before being put into use.

Lubrication and maintenance

Lubrication and maintenance is an effective way to reduce the wear and damage of the corn concentrator equipment and keep the equipment intact. It is necessary to carry out mechanical maintenance and lubrication maintenance work after the shutdown of the warehouse or before the start-up every morning to reduce the failure rate of the equipment. Our company also sells Seed Cleaner and Grader, welcome to contact us.


This website:http://www.synmec.com/news/440.html

Key word:SeedCleanerandGraderManufacturer,SeedCleanerandGrader

Recently, browse:

clean the world's grain process the world's seeds
Service
二维码

Scan QR code

share One click sharing