The corn selection machine and the corn cleaning sieve are important types of
corn cleaning equipment; suitable for selecting grain crops such as wheat, corn,
beans, sorghum, tea seeds, etc., with super dust removal cleaning, specific
gravity grading selection and volume multi-purpose functions such as grading and
screening. Compared with the same type of products, the selection machine has
the following advantages: it can remove 99% of the broken cores and light
impurities of the same volume as the grain particles in different types of
grains, and can remove more than 98% of the moldy and degraded grains in the
grain. . And this series of equipment is suitable for use in grain processing
centers, seed processing bases, farms, and grain purchasing online stores. So
how to do preventive maintenance for the corn selection machine? Follow Seed
Cleaner and Grader Manufacturer to take a look.
Seed Cleaner and Grader
After each large-scale warehousing, all used equipment should be finely overhauled and maintained. Air pumps should be used to remove dust inside and outside the equipment and at the gaps, leaving no dead corners, and then wipe with a rag; check all power distribution lines, replace aging wires, Maintenance of the motor; oil immersion, cleaning the large and small bearings, screws, etc., and adding lubricating oil to maintain the bearings; replacement of broken or damaged parts, welding and correcting the collision part if necessary; anti-rust treatment on the paint peeling part, etc., until scrubbing and maintenance. New, neatly placed in the mechanical library after installation and commissioning. This work is generally completed before the purchase of summer grain and autumn grain. Professionals from the manufacturer can be invited to carry out this work together with the maintenance personnel of the company. At the same time, the equipment maintenance plan shall be arranged every year according to the condition of equipment wear and the requirements of the equipment manual, and equipment overhaul and medium repair shall be actively carried out.
After mechanical equipment breaks down or is damaged, promptly carry out equipment repair work. Generally, you should first consider replacing the faulty machinery with a spare machine, in order not to delay the process of entering and leaving the warehouse; if there is no spare machine or the fault is easy to solve, the maintenance personnel need to work overtime. Post-maintenance is generally only for the point of failure. If the mechanical equipment needs to be fully repaired after it is replaced, it should also be overhauled before being put into use.
Lubrication and maintenance
Lubrication and maintenance is an effective way to reduce the wear and damage of the corn concentrator equipment and keep the equipment intact. It is necessary to carry out mechanical maintenance after the warehousing operation is completed or before the machine is turned on in the morning, and the lubrication maintenance work of fixed person, fixed point, fixed quality, quantitative and fixed period should be carried out to reduce the failure rate of equipment.
Our company also sells Seed Cleaner and Grader, welcome to contact us.
WAIMAO STREET, SHIJIAZHUANG CITY,
HEBEI PROVINCE, CHINA
Tel: +86 31167663887
Address：SHENGSHICHUNTIAN NANYUAN, WAIMAO STREET, SHIJIAZHUANG CITY, HEBEI PROVINCE, CHINA